Figure 4-4 Pci Hot-Plug Retention Mechanism - Silicon Graphics 1450 User Manual

4: Removing and Installing User Serviceable Components
84
A
B
Figure 4-4 PCI Hot-Plug Retention Mechanism
A. Green and Amber LEDs
B. Press here on the inside of the chassis and then rotate to release the PCI board.
C. PCI Hot-plug Retention Mechanism from the outside of the chassis
D. HW push button
The rear of add-in boards is held in place by a rear retention latch only for full-length
boards. See Figure 4-5 for an illustration of the rear retention latch.
C
D
007-4274-001