Hot Keys - Silicon Graphics 1450 User Manual

3: Configuring Software and Utilities

Hot Keys

36
Configuration Utilities
Table 3-1
Utility Description and brief procedure
Server Setup Use for extended system configuration of onboard
Utility (SSU) resources and add-in boards, viewing the system event
log (SEL), setting boot device priority, or setting system
security options.
The SSU can be run from either the configuration
software CD or from a set of bootable diskettes. You can
create the diskettes from the CD.
Information entered via the SSU overrides information
entered via Setup.
FRUSDR Load Use to update the Field Replacement Unit (FRU),
Utility Sensor Data Record (SDR), and Desktop Management
Interface (DMI) flash components.
BIOS Update Use to update the BIOS or recover from a corrupted
Utility BIOS update.
Firmware Use to update BMC flash ROM.
Update Utility
Table 3-2 shows the key combinations used to perform certain operations.
Table 3-2 Hot Keys
To do this:
Clear memory and reload the operating system—this is
a system reset.
Secure your system immediately.
Enter the Adaptec SCSI Utility during BIOS POST.
Page
"Using the System
Setup Utility (SSU)" on
page 68
"FRU and SDR Load
Utility" on page 71
"Upgrading the BIOS"
on page 75
"Using the Firmware
Update Utility" on
page 78
Press these keys
<Ctrl+Alt+Del>
<Ctrl+Alt>+hot key (Set your hot key
combination using the SSU or Setup.)
<Ctrl+A>
007-4274-001