Error Message Description - Moneual RYDIS Hybrid H68 Pro User Manual

RYDIS H68 Pro

Error Message Description

The RYDIS H68 Pro will display a combination of numbers and icons to inform the users of what the issue is.
Using the information below, it is important to resolve the issue first as pressing any button will clear the
error message.
If the problem has not been solved with one of the solutions below, please contact our customer service.
The error voice guidance comes only one time when the error has occurred. You can re-check the error status
by pressing the SELECT button on the remote control.
50
Cause The battery is fully discharged, so the RYDIS H68 Pro does not work.
Voice Out of battery.
Solution Charge the RYDIS H68 Pro manually.
Cause The wheel motor has been overloaded. Some obstacles (hairs, wires, etc.) are
jammed on one or both wheels.
Voice Please check the wheels.
Solution Move the RYDIS H68 Pro to another place. Remove obstacles on the wheel(s).
Cause The dust inlet fan is overloaded.
Voice There is an error.
Solution Remove obstacles in the dust inlet and empty the dust bin.
Cause The main brush is overloaded.
Voice Please check the main brush.
Solution Remove obstacles (hairs, wires, etc.) in the main brush.
Cause You tried to charge the RYDIS H68 Pro without the battery.
Voice No Battery.
Solution Check if the battery is installed in the RYDIS H68 Pro properly.
Cause The battery failure.
Voice There is an error.
Solution Contact your customer service.