Moneual RYDIS Hybrid H68 Pro User Manual page 12

RYDIS H68 Pro
Do not touch the plug or wall socket with wet hands.
Doing so may cause electric shock.
If you spill water into the RYDIS H68 Pro, unplug the power cord immediately.
Water can bring the risk of fire and electrical shock.
Immediately remove the power cord from the outlet and contact our service center.
Do not use charging stations other than the charging station that came with your RYDIS H68 Pro.
Overvoltage brings the risk of fire and electrical shock.
Do not install the charging station in a location that is damp or wet, dusty, or near water.
This may cause a fire or an electrical shock and damage to the unit.
Do not touch the terminal of the charging station with any metallic object (such as a clip, pin, etc.).
This creates the risk of fire and electrical shock.
If you do not plan to use the RYDIS H68 Pro for an extended period of time, turn off the system power switch at
the rear.
The battery may be discharged if you leave it the system power switch on.
Others
To ensure safety, only a qualified service agent should repair or disassemble the product.
Any repairs done by unqualified personnel may damage the RYDIS H68 Pro and bring the risk of a fire and electrical
shock.
Dispose of the battery properly.
If you throw the battery into a fire or expose it to direct sunlight, there is the risk of fire and explosion.
Dispose of your old batteries according to the local laws and regulations of your region.
Clean the obstacle and bottom sensors periodically.
If the sensor becomes covered by lint and dust, the RYDIS H68 Pro may malfunction.
Please use the specified filter.
Use of a different filter will void your warranty.
10