RYDIS H68 Pro
Cleaning the Dust Inlet
1
3
Clean the removed main brush with
the cleaning brush.
5
To reinstall the dust inlet cover, insert the 2 tips to the
matching holes on RYDIS H68 Pro.
44
Remove the dust inlet cover.
2
4
Remove the main brush.
First, insert the main brush's
hexagonal head to the matching
hexagonal socket on the
RYDIS H68 Pro.
Second, install the main
brush by inserting the
bearing to the housing.
Make sure to orient bearing
so that the smaller tip is
facing inward.