Shadow Cleaning - Moneual RYDIS Hybrid H68 Pro User Manual

RYDIS H68 Pro

Shadow Cleaning

You can clean areas under your bed, sofa, or furniture that are difficult to clean with an upright vacuum cleaner or by hand.
To use Shadow Cleaning mode, turn the room light on. In a dark room, the RYDIS H68 Pro can't detect the
space under the bed or furniture.
The RYDIS H68 Pro moves to a place under the bed or furniture to start shadow cleaning. To reduce the time
spent moving through the room, put the RYDIS H68 Pro in front of the bed or furniture under which you want
to perform shadow cleaning.
1
Put the RYDIS H68 Pro in front of
a bed or furniture. Recommend
turn the room light on if any.
3
Turn the main power button on.
The LED light will blink top to bottom.
It will show its ready to operate after
2 seconds.
5
32
4
or
2
Select the Shadow Cleaning with the Mode button on the
Control Panel and press the Start/Stop button or just press
the Shadow Cleaning button on the remote control.
While in Shadow Cleaning Mode, you can also select Turbo Option,
Double Deep Cleaning Option and Threshold (climb over) Option.
To select these please refer to the pages that reference each.
RYDIS H68 Pro will stop in front of a bed or furniture after Shadow
Cleaning.
Hybrid Cleaning and Vacuum Cleaning are supported with Shadow
Cleaning. Mop Cleaning is not supported with Shadow Cleaning.
Turn the system power switch on.
or