Moneual RYDIS Hybrid H68 Pro User Manual page 11

Do not press strongly or impact the bumper.
This may cause damage to the bumper sensors and malfunction.
Do not use the RYDIS H68 Pro in a place where the temperature is too low or too high (lower than 23F (-5°C) and
higher than 120F (49°C)).
This may cause damage to the product.
Do not use the RYDIS H68 Pro when the dust bin is filled up.
This may reduce the suction power.
Never use the RYDIS H68 Pro without the filters.
Doing so may cause a malfunction of the RYDIS H68 Pro.
Do not use the RYDIS H68 Pro in a place where the floor or wall is made of glass or mirrors.
The RYDIS H68 Pro detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.
Do not use the RYDIS H68 Pro on a flooded floor, on stairs, on a table or shelf, in a warehouse, in a commercial
building, or outdoors.
If you have dropped or given an impact to the RYDIS H68 Pro, contact our service center.
Electrical instructions
Please use the power source and socket with the correct Voltage and Ampere.
If you use a power source or socket that does not fit the power specifications, there is the risk of fire, electrical shock,
and damage to the RYDIS H68 Pro.
Make sure the power cord is not bent or crushed by heavy objects.
A damaged power cord may cause a fire or electrical shock.
To repair or replace a damaged power cord, contact our qualified service center to ensure your safety.
When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
Stress on the cable will damage the power cord, which may cause a fire or electrical shock.
Before Use
9