Aastra 415 User Manual page 94

Alarm
Operation on an alarm system with event transmission and moni-
toring
When a phone is operated on an alarm system with event transmission and monitor-
ing, a separate alarm message is sent to the alarm system for each type of alarm trig-
ger:
• Manual trigger using the SOS key
• Automatic trigger with man-down alarm
• Automatic trigger with no-movement alarm
• Automatic trigger with escape alarm
• Combined automatic trigger with man-down and no-movement alarm
This means that, depending on the type of trigger, the alarm server is able to respond
differently to the alarms it receives.
You can trigger a test alarm to check the alarm function (see Chapter
alarm function", page 105). The phone also triggers an alarm if the battery power
drops below a certain value (see Chapter
By configuring an alarm server you have the following possibilities at your disposal:
• Send alarm texts to a phone
• Specify the type of alarm ring tone on the phone
• Override the set ring tone on the phone (server alarm) including
press ring tone.
• Cancel a call connection then trigger an alarm.
• Display softkeys on the phone and respond to user inputs.
• Delete alarms on a phone.
• Configure the Call Key with a function (see Chapter
• Receive a message if the phone is placed in or removed from the charging bay.
• Determine the phone's approximate location using measured values from various
radio units.
This configuration can only be made by your system administrator.
94
"Battery alarm", page 104).
"Configuring
"Testing the
Vibra call and Sup-
keys", page 87).
eud-1292/1.1 – R1.0 – 09.2011