Installing Eco-Solvent Plus Ink Cassettes - MUTOH Rockhopper II Series User Manual

4.5. INSTALLING ECO-SOLVENT PLUS INK CASSETTES

The installation of Eco-Solvent Plus ink cassettes for the first time into the unit is explained below.
Caution :
•
Caution :
Notes :
•
•
•
To install ink cassettes, follow the steps below.
Step 1 :
Before powering ON the unit for the first time, please be sure to have :
8 cleaning cassettes (related to the requested ink configuration)
8 cassettes of the requested ink configuration
Caution :
•
Step 2 :
Check if the Waste Bottle is empty.
Before powering ON the unit, make sure the waste bottle is installed.
When handling Eco-Solvent Plus ink cassettes, be careful that ink does not get in
your eyes or on your skin. However, if this happens, flush immediately with water.
Otherwise, your eyes may become congested or inflamed slightly. If you feel
discomfort, consult a doctor immediately.
Do not disassemble ink cassettes. Otherwise, ink may get in your eyes or on your
skin.
Only use Eco-Solvent Plus ink and appropriate cleaning liquid. Using other ink (e.g.
dye or pigment) could cause permanent damage to the printer.
This product has been tuned for the use of Eco-Solvent Plus ink cassettes. If other
manufacturer's products are used,
drawing results become faint or ink ends are not properly detected, and
o
the warranty will not cover (repairs will require a fee) any resultant
o
breakdown.
Refer to the price list for the different types and details of ink cassettes.
Do not shake ink cassettes strongly. Otherwise, ink may leak.
Do not disassemble ink cassettes. You cannot use disassembled cassettes.
When powering ON the unit for the first time, a cleaning cycle should be done.
Please follow the instructions mentioned on the display.
Rockhopper II series printers – User's Guide
51 AP-75095, Rev. 2.1, 18/08/2005