Loading Eco-Solvent Plus Ink Cassettes (First Time) - MUTOH Rockhopper 38 User Manual

4.3. LOADING ECO-SOLVENT PLUS INK CASSETTES (FIRST
TIME)
Important :
Before installing Eco-Solvent Plus ink cassettes in your new Rockhopper 38
printer, it is necessary to clean the Rockhopper 38 with special Eco-Solvent Plus
Cleaning Liquid.
Before transportation (e.g. service) it is necessary to clean the Rockhopper 38
(which used Eco-Solvent Plus ink) with special Eco-Solvent Plus Cleaning
Liquid.
When the machine returns or is installed at another place, perform again a
cleaning with the special Eco-Solvent Plus Cleaning Liquid.
Please only use the Eco-Solvent Plus Cleaning liquid. Using other cleaning
cassettes will result in clogging of ink in the machine. As a result all internal
ink-passages must be replaced.
Note :
When loading Eco-Solvent Plus ink for the first time, please make sure to have four
Eco-Solvent Plus Cleaning liquid cassettes.
Before installing Eco-Solvent Plus ink cassettes in your new Rockhopper 38 printer, it is necessary to clean
the Rockhopper 38 with special Eco-Solvent Plus Cleaning Liquid.
To do so, please follow the instructions mentioned below.
[YMCK] discharge
Wash: Black&Colour
Note :
Please note that the Rockhopper 38 printer has two print heads (K, CMY). A head
wash cycle is done per print head. This means that the first head wash cycle is
performed for the K print head only, and then a head wash cycle is performed for the
CMY print head.
Step 1:
Power ON the unit.
Step 2:
Slide the four Eco-Solvent Plus Cleaning liquid cassettes into their cassette
position. Automatic detection of cleaning cassettes occurs due to label
recognition.
Step 3:
Press the [VALUE +] key or [VALUE -] key to select "Yes" and press
ENTER.
Page
Rockhopper 38 – User's Guide
35
AP-75038, Rev. 1.0. – 27/05/04