Loading Eco-Solvent Ultra Ink Cassettes (First Time) - MUTOH Rockhopper 38 User Manual

4.3. LOADING ECO-SOLVENT ULTRA INK CASSETTES (FIRST
TIME)
Important :
Before installing Eco-Solvent Ultra ink cassettes in your new Rockhopper 38
printer, it is necessary to clean the Rockhopper 38 with special Eco-Solvent
cleaning liquid.
Before transportation (e.g. service) it is necessary to clean the Rockhopper 38
(which used Eco-Solvent Ultra ink) with special Eco-Solvent cleaning liquid.
When the machine returns or is installed at another place, perform again a
cleaning with the special Eco-Solvent cleaning liquid.
Please only use the Eco-Solvent cleaning liquid. Using other cleaning cassettes
will result in clogging of ink in the machine. As a result all internal ink-passages
must be replaced.
Note :
When loading Eco-Solvent Ultra ink for the first time, please make sure to have four
Eco-Solvent cleaning liquid cassettes.
Before installing Eco-Solvent Ultra ink cassettes in your new Rockhopper 38 printer, it is necessary to clean
the Rockhopper 38 with special Eco-Solvent cleaning liquid.
To do so, please follow the instructions mentioned below.
[YMCK] discharge
Wash: Black&Colour
Note :
Please note that the Rockhopper 38 printer has two print heads (K, CMY). A head
wash cycle is done per print head. This means that the first head wash cycle is
performed for the K print head only, and then a head wash cycle is performed for the
CMY print head.
Step 1:
Power ON the unit.
Step 2:
Slide the four Eco-Solvent cleaning liquid cassettes into their
cassette position. Automatic detection of cleaning cassettes occurs
due to label recognition.
Step 3:
Press the [VALUE +] key or [VALUE -] key to select "Yes" and
press ENTER.
Page
37
Rockhopper 38 – User's Guide
AP-75038, Rev. 1.3 – 10/01/06