Features - Fujitsu SK-96620_350-64PMC(1) User Manual

1.2 Features

 Supports following Fujitsu products:
 F²MC-16FX Microcontroller MB96620 Series with in FPT-64P-M23/24 package
 Embedded Emulator MB2100-01-E
 F²MC-16FX Microcontroller MB96350 Series with in FPT-64P-M23/24 package
 MB2198 Emulator System with the Probe Cable MB2198-504
 F²MC-16LX Microcontroller MB90350 Series with in FPT-64P-M23/24 package
 MB2147 Emulator System with the Probe Cable MB2198-540
 9-12 V unregulated external DC power supply usable
 3.3 V and 5 V internal power supply, Power-LED
 In-Circuit serial Flash programming
 All resources available for evaluation
 All 64 pins routed to connectors
 4 MHz main-crystal, 32 kHz sub clock-crystal (selectable by jumpers)
 Two UART Interfaces
 Two LIN-Transceivers
 Two High-Speed CAN Transceiver
 8 User LEDs, optional: alphanumeric standard LC-Display connectable instead of LEDs
 Reset-Button, Reset-LED
 5 User-buttons configurable for INT10, INT11, TIN1, IN0 and IN1
 96 pin VG connector
 ON-Chip Debug Connector
This board must only be used for test applications in an evaluation laboratory
environment.
© Fujitsu Semiconductor Europe GmbH
SK-96620_350-64PMC(1) User Guide
Chapter 1 Overview
- 7 - UG-960028-12