Fujitsu SK-96620_350-64PMC(1) User Manual page 26

4.10.3 LIN "A" (JP: 17, 18, 46
JP17 Enables LIN"A" transceiver
JP18 Selection of LIN "A" as master or slave
JP46 LIN "A" bus powered by 12V board supply
Jumper
JP17
(LIN "A" enable)
JP18
(LIN "A" master)
JP46
(LIN "A" Vbat)
Note:
Concerning pin assignment on the LIN DSUB-9 connector see chapter 5.4.
© Fujitsu Semiconductor Europe GmbH
SK-96620_350-64PMC(1) User Guide
Chapter 4 Jumpers and Switches
Setting Description
LIN "A" enabled
Closed
LIN "A" disabled
Open
LIN "A" is LIN Master
Closed
LIN "A" is LIN Slave
Open
LIN "A" bus (X6 pin 1) is powered by the board
Closed
LIN "A" bus (X6 pin 1) is not powered by the board
Open
Table 4-11: LIN "B" Settings
- 26 - UG-960028-12