Features; Overview - Fujitsu D2759 Technical Manual

3

Features

3.1

Overview

Processors
– one processor socket LGA1156
®
– one Intel Quad-Core processor of the Intel Xeon 3400 series (up to 95 W)
®
or one Intel Dual-Core processor (Xeon, Celeron, Pentium or Core-i3)
– VRM 11.1 onboard
Main memory
– up to 6 slots for main memory, the number of allowed memory modules is
dependent on CPU and memory type
– up to 4 UDIMM (unbuffered DIMM) or up to 6 RDIMM (registered DIMM)
memory modules, RDIMM memory modules are configurable for Xeon
CPUs only
– only DIMMs with ECC are supported
– minimum memory configuration: one DIMM in DIMM1A
– maximum memory configuration: UDIMM memory modules 16 GB, RDIMM
memory modules 32 GB
– ECC multiple bit error detection and single bit error correction
Chips on the system board
– Intel 3420 chip set
– Gigabit Ethernet controller (Intel 82574L)
– Service LAN controller (10/100 PHY SMSC 8700)
– 4 MB Flash BIOS
– onboard iRMC S2 Server Management Controller with integrated graphics
controller and associated service LAN connector
– 16 MB SPI Flash (code) and 1 MB SPI Flash (data) for iRMC S2
– 32Mx16-667 DDR2 SRAM for iRMC S2
D2759 (TX150 S7)
Technical Manual 17