HP ProCurve Series 8212zl Installation And Getting Started Manual page 36

Installing the Series 8200zl Switch
Installation Procedures
W A R N I N G
For safe operation, please read the "Installation Precautions" on
2-5
1.
8 mm
M4 screws
Figure 2-2. Attaching Brackets to the 8200zl Switch
2-10
and page 2-6 before mounting the switch.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
For the Switch 8200zl, each bracket is attached with four screws as shown
in the following illustration.
page