Back Of The Switch; Power Connector - HP ProCurve Series 8212zl Installation And Getting Started Manual

Back of the Switch

.
Slots for installing optional
redundant power supply
Figure 1-8. Back of a 8212zl Switch with two Power Supplies

Power Connector

The Series 8200zl Switch does not have a power switch; it is powered on when
connected to an active AC power source. The Series 8200zl Switch automati-
cally adjusts to any voltage between 100-127 and 200-240 volts when using the
J8712A power supply, and 200-240 volts only when using the J8713A power
supply, and either 50 or 60 Hz.There are no voltage range settings required.
Introducing the ProCurve Series 8200zl Switch
Grounding lug
mounting holes
External PoE
power connectors
Back of the Switch
Fan Power, Fault
and Locator LEDs
1-13