HP ProCurve Series 8212zl Installation And Getting Started Manual page 17

PoE On green
(green/orange)
Off
Blinking
orange
Blinking
orange
Tmp Off
(green/orange)
Blinking
Fan On green
(green/orange)
Blinking
orange
Internal Power 1-4 On green
(green/orange -
numbers
corresponding to
Off
the power supply
positions)
Blinking
orange
EPS (1 and 2) On green
(green/orange)
Off
Blinking
orange
Fabric Modules On green
(1 and 2)
Off
(green/orange)
Blinking
orange
If any PoE modules are installed.
If no PoE modules are installed.
Internal PoE fault.
1
External load fault or denied PoE power.
2
Switch temperature is normal.
1
An over temperature condition has been detected.
The cooling fans are operating normally.
One or more of the cooling fans have failed. The switch Fault LED will be blinking
1
simultaneously.
A power supply is installed in the position in the back of the switch corresponding
to the number, and the supply is plugged in to an active AC power source. As
shipped, the switch has a single power supply in position 1.
A power supply is not installed in the position corresponding to the number.
The power supply installed in the position corresponding to the number is not
1
plugged in to an active AC power source, or has experienced a fault. The switch
Fault LED will be blinking simultaneously.
An External Power Supply is connected.
No External Power Supply is connected.
The External Power Supply has a fault, or is connected but not plugged into AC
1
power.
A Fabric Module is installed and functioning correctly.
A Fabric Module is not installed or has failed.
The Fabric Module has a fault.
1
The switch Fault LED will be blinking simultaneously.
Introducing the ProCurve Series 8200zl Switch
Front of the Switch
1-7