Required Items Not Included; Optional Item; Required Tools; Rack-Mounting The Console Switch - HP 409054-003 User Manual

Required items not included

•
Interface adapters
One interface adapter is needed for each server or device.
USB 2.0 with Virtual Media
o
PS2 with Virtual Media
o
USB (not Virtual Media capable)
o
PS2 (not Virtual Media capable)
o
Serial
o
HP BladeSystem CAT5 KVM (not Virtual Media capable)
o
•
UTP CAT5 cable (CAT6 and CAT7 can also be used)

Optional item

Expansion module (not Virtual Media capable)

Required tools

The following tools are required for some procedures:
•
Phillips screwdriver
•
Cage nut insertion tool (included with your original rack hardware kit)

Rack-mounting the console switch

NOTE:
power source, using the power cords provided, and power on the unit. An activity indicator
light
indicator light does not display, be sure that the power is on, the power cord is connected,
and the power source is valid.
Several rack-mounting configurations include:
•
Side-mount
Type A—Square- and round-hole rails
o
Type B—Square-hole rails
o
NOTE:
•
Standard-mount
•
Cantilever-mount
Type A—Round-hole rails
o
Type B—Square-hole rails
o
("Installing the interface
Before installing the console switch into the rack, connect the console switch to a
("Console switch components" on page 6) is displayed after a few seconds. If the activity
The console switch cannot be side-mounted into a rack with round-hole rails.
adapter" on page 21)
Installing the console switch 10