To access the Config dialog box, from the Main dialog box
28), click Commands>Config. The Config dialog box appears.
Running system diagnostics
You can validate the firmware CRCs and interface adapter status for the console switch through the Run
Diagnostics command.
To access the Diagnostics dialog box, click Commands>Run Diagnostics.
Test
Firmware CRCs
Remote User Video
(digital only)
Description
Validates the current firmware images stored in the system FLASH by comparing a
CRC value on each image and comparing those results to the expected values.
Verifies that all the video channel subsystems are accessible, functional, and
performing basic register level tests.
("Accessing the Main dialog
Local port operation 54
box" on page