Changing The Status Flag - HP 409054-003 User Manual

Flag

Changing the status flag

From the Main dialog box
1.
Flag Setup dialog box appears.
Select Name or EID to determine what information appears on the flag in the Flag Type area.
2.
Select Displayed (default) to show the flag constantly, and select Timed to display the flag for only
3.
five seconds after soft switching.
Select a flag color in the Display Color area.
4.
Select Opaque for a solid-color flag, or select Transparent to see the desktop through the flag in the
5.
Display Mode area.
Position the status flag on the desktop:
6.
Click Set Position to access the Set Position flag. The Set Position flag appears.
a.
Click and hold the title bar, and then drag the flag to the desired location.
b.
Right-click to return to the Flag dialog box.
c.
Click OK to save settings, or press the Esc key to exit without saving settings. Changes made to the
7.
flag are not saved until you click OK.
Description
Flag type by EID number
Flag indicating that the user has been disconnected from all systems
Control that is used to set flag position
("Accessing the Main dialog box" on page 28), click Setup>Flag. The
Local port operation 34