Assigning names to servers
From the Names dialog box
1.
name or port number and click Modify. The Name Modify dialog box appears.
Enter a name in the New Name field. Names can be one to 15 characters in length. Permitted
2.
characters are case-sensitive and can consist of A–Z, 0–9, spaces, and hyphens.
Click OK to transfer the new name to the names list in the Names dialog box.
3.
Repeat steps 1 through 3 for each server in the system.
4.
Click OK to save settings, click X to exit, or press the Esc key to exit without saving settings.
5.
NOTE:
Names dialog box.
Setting up a scan pattern
In Scan mode
(server to server).
("Assigning server and serial device
Changes made in the Name Modify dialog box are not saved until you click OK in the
("Activating Scan
mode" on page 46), the console switch automatically scans port to port
names" on page 43), select the
Local port operation 44