Elation TVL3000-II WW User Instructions page 7

TVL3000-II WW/CW/DW
ADDR -
DMX Address Setting.
1. First set the unit to your desired DMX Channel mode.
2. To set your address, press either the MENU, UP, or DOWN
buttons until "ADDR" is displayed, press ENTER. "1" will now be
displayed and flashing.
3. Press the UP or DOWN buttons to find your desired address.
When you have found your desired DMX address press ENTER,
and then press and hold the MENU button for at least 3 sec-
onds. Once the address is displayed connect your DMX Con-
troller.
CHND -
In this submenu you can switch between the 2
DMX Channel Modes. Both Channel modes are 2 Channels
each.
1. Press the MENU button until "CHND" is displayed, press
ENTER. Either "MOD 1" or "MOD 2" will be displayed.
2. Press the UP or DOWN buttons to choose your desired DMX
channel mode and press ENTER to confim and exit. Please see
page 17, TVL3000-II DW DMX traits to see the different DMX
modes and traits.
CTND -
In this submenu you are able to scroll through and
select your desired color temperature.
1. Press the MENU button until "CTND" is displayed, press
ENTER.
2. Press the UP or DOWN buttons to scroll through the different
color temperatures. Once you have found your desired color
temperature, press ENTER to confirm, then press and hold the
MENU button for at least 3 seconds to activate.
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 13
System Menu TVL3000-II WW/CW/DW
DIMM -
1. Press the MENU button until "DIMM" is displayed, press
ENTER.
2. Use the UP and DOWN buttons to adjust the intensity until
you reach your desired intensity. Once you have found your
desired intensity, press ENTER to confirm, then press and hold
the MENU button for at least 3 seconds to activate.
BLND -
1. Press the MENU button until "BLND" is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout press the UP or DOWN buttons until Yes
is displayed, press ENTER to confim and exit. The fixture will
now be in Blackout mode. To deactivate Blackout mode, select
No and press Enter.
TEST
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test program. To exit the self
test mode press either the MENU or ENTER button.
LED -
off after 20 seconds.
1. Press the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display On at all
times, or "OFF" so that the LED display turns off after 20 sec-
onds.
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 14
Dimmer mode.
Blackout or Stand by mode.
- This function will run a self test program.
In this submenu you can have the LED display turn
System Menu