Photometric Chart; Troubleshooting - Elation TVL3000-II WW User Instructions

TVL3000-II WW/CW/DW
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 19

Photometric Chart

TVL3000-II WW/CW/DW
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning
the internal and external optical lenses and mirror should be carried
out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
TVL3000-II WW/CW/DW
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
1. The unit does not work, no light and the fan does not work
- Check the power connection on both the unit and power source.
2. Not responding to DMX controller
- DMX LED should be on. If not, check DMX connectors and cables
make sure they are linked properly.
- If the DMX LED is on and no response to the channel, check the
address settings
- If you have intermittent DMX signal problems, check the pins on
connectors.
- Try to using another DMX controller.
- Check if the DMX cables run near or run alongside high voltage
cables that may cause damage or interference to DMX interface
cir cuit.
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 20
Cleaning
Trouble Shooting