TVL3000-II WW/CW
TVL3000-II DW
DMX 512 Configuration
Ch2
Amber
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 17
DMX Traits
DMX Modes & Traits
Ch2
Color
Dimmer
Mixing
TVL3000-II WW/CW/DW
When changing the beam angle unscrew the thumb screw
and remove the previous lens kit and replace with the new kit,
now replace the thumb screw.
attached to the unit.
TVL3000-II WW/CW/DW
The unit should be mounted using a mounting clamp (not provided),
affixing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is firmly fixed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit's weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the fixture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people's grasp.
©Elation Professionals® - www.elationlighting.com - TVL3000-II WW/CW/DW User Manual Page 18
Changing the Beam Angle
The 10˚ lens is the lens that comes
Installation