Baud Rate - Datalogic QD2100 Product Reference Manual

Introduction
Use the programming barcodes in this chapter if modifications to the standard RS-232
interface settings are necessary to meet your system's requirements. Additional settings
which apply to both the RS-232 and USB interfaces are available in
USB-Com Interfaces
RS-232 Standard Factory Settings
Reference

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set the reader's baud rate
to match the baud rate setting of the host device. With an improper baud rate setting,
data may not reach the host correctly.
Baud Rate = 2400
Product Reference Guide
RS-232 ONLY Interface
.
Appendix B, Standard Defaults
ENTER/EXIT PROGRAMMING MODE
Chapter 5
for a listing of standard factory settings.
Baud Rate = 1200
Baud Rate = 4800
Chapter 6, RS-232/
41