Winston Industries PF46C Owner's Manual page 27

PRoGRammInG
RUnnInG tHE FIElD DIaGnoStIcS
Field Diagnostics are used to help diagnose fryer problems. While running the Field diagnostics program, if a problem exists with fryer
components or controller, the display will show an error message.
StEP 1
Turn fryer power switch ON.
StEP 2
In sequence, press the following buttons to enter programming mode.


then then then

PROG
EN THE
COMPUTER DISPLAYS
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Note: At any time during programming, time settings can be set to :00 indicating from that point on, the fryer will cook at the last
setting entered until the end of the cycle.
Need to coNtact us?
www.winstonindustries.com | E-mail customerservice@winstonind.com
Phone 1.800.234.5286 | 1.502.495.5400 | 1.502.495.5458 • Mail 2345 Carton Drive | Louisville, KY 40299 USA
then

PRESS
BUTTON/ACTION
6
PRESS EACH OF THE 16 BUTTONS
SWITCH POWER OFF.
9 10
SWITCH POWER ON.
FRYERS
NOTE
S
Indicates Programming mode. Press #6 to proceed.
From left to right, on the 4-digit display,
all segments of digit 1 light, then all segments of
digit 2 light, then digit 3, and digit 4.
All segments of all digits including the colon display.
All of the product button LED's will light.
All of the product button LED's will be off.
A medium volume tone will sound.
A high frequency tone will sound.
The controller will energize the heater relay.
The controller will call for pressure.
As each button is pressed, the button number, 1 through 16,
will be displayed.
Resets computer.
Switch power back on, holding keys 9 and 10 to reset.
27