Winston Industries PF46C Owner's Manual page 25

PRoGRammInG
PRocESS 5
Programming Process #5 (PC 5) - 1 temperature, 1 time
Note: Not all fryers have a Process #5.
StEP 1
First choose the channel you want to program.
2 3 4 5 6
WHEN THE
COMPUTER DISPLAYS
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Note: At any time during programming, time settings can be set to :00 indicating from that point on, the fryer will cook at the last
setting entered until the end of the cycle.
Need to coNtact us?
www.winstonindustries.com | E-mail customerservice@winstonind.com
Phone 1.800.234.5286 | 1.502.495.5400 | 1.502.495.5458 • Mail 2345 Carton Drive | Louisville, KY 40299 USA
7 8
PRESS
BUTTON/ACTION
ENTER
5
ENTER
HEAT SETPOINTS H1


or
ENTER
TIME SETPOINT T1


or
ENTER
 
or
ENTER
FRYERS
StEP 2
In sequence, press the following buttons to enter
programming mode.
then  then then


PROG
NOTE
Indicates Programming mode. Press ENTER to proceed.
Press channel button #5 for selecting process #5.
Press ENTER to proceed.
H1 displays momentarily.
Use arrow buttons to modify. Hold either button for fast
scrolling. Will display in F or C. 250˚F (121˚C) minimum, 360˚F
(182˚C) maximum.
Press ENTER to proceed.
t1 displays momentarily.
Use arrow buttons to modify. Hold either button for fast
scrolling. Display shows MM:SS (minutes:seconds). :00
minimum, 99:55 maximum.
Press ENTER to proceed.
Use arrow button to toggle between Open (O) and Pressure (P).
Press ENTER to exit.
then

25