Configuration Information - Factory Integrated Models - HP ProLiant DL180 G5 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are NOTE: NOTE: NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: NOTE: NOTE: HP does not allow factory integration of options into standard models listed above. NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: NOTE: NOTE:
NOTE: NOTE: FIO indicates that this option is a Factory Installable Option. NOTE: NOTE:
Step 1: Base Configuration (choose one of the following configurable models) Step 1: Base Configuration (choose one of the following configurable models) Step 1: Base Configuration (choose one of the following configurable models) Step 1: Base Configuration (choose one of the following configurable models)
Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted) noted) noted) noted)
Processors Processors Processors Processors
Hot Plug Models Hot Plug Models Hot Plug Models Hot Plug Models
HP ProLiant DL180 G5 Hot Plug SAS/SATA Rack CTO Chassis
Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with: Factory Integrated Model ships with:
One embedded NC105i PCI-E Gigabit Server Adapters (WOL & PXE-capable)
Three available PCI-Express slots:
Slot 1: x8 low-profile/half-height slot
Slot 2 & 3: x4 Full-Height/Full Length
NOTE: NOTE: NOTE: NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height PCI-X
100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in
the server.
One HP SATA Embedded Cable Kit
750 Watt Power Supply
One Highline IEC Power Cord
4 Non-Hot Plug Fans
Rack (2U), (3.5 in/8.89 cm)
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
NOTE: If 2 processors are desired, select one 487901-L21 and one 487901-B21. NOTE: NOTE: NOTE:
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
NOTE: NOTE: NOTE: If 2 processors are desired, select one 491310-L21 and one 491310-B21. NOTE:
Quad-Core Intel® Xeon® processor E5440 (2.83 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 466106-L21 and one 466106-B21. NOTE: NOTE: NOTE:
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: NOTE: NOTE: If 2 processors are desired, select one 458784-L21 and one 458784-B21. NOTE:
Quad-Core Intel® Xeon® processor E5420 (2.50 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: NOTE: If 2 processors are desired, select one 458785-L21 and one 458785-B21. NOTE: NOTE:
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Kit,
FIO
NOTE: If 2 processors are desired, select one 458786-L21 and one 458786-B21. NOTE: NOTE: NOTE:
Dual-Core Intel® Xeon® processor E5205 (1.86 GHz, 65W, 1066MHz FSB) Kit, FIO
NOTE: If 2 processors are desired, select one 458787-L21 and one 458787-B21. NOTE: NOTE: NOTE:
DA - 12903 Worldwide — Version 10 — July 14, 2008
HP ProLiant DL180 Generation 5 (G5) HP ProLiant DL180 Generation 5 (G5) HP ProLiant DL180 Generation 5 (G5) HP ProLiant DL180 Generation 5 (G5)
457649-B21
487901-L21
491310-L21
466106-L21
458784-L21
458785-L21
458786-L21
458787-L21
Page 11