Epson LQ-570e Service Manual page 115

EPSON LQ-570e/LQ-580
Address Data
4AH Panel mask pattern 1
4BH Panel mask pattern 2
4CH Manual feed wait time
4DH Tear-off wait time
4EH,4FH (reserved)
50H I/F mode selection
51H Auto I/F wait time setting
52H Input Buffer
53H IEEE1284.4 for Parallel I/F
54H (reserved)
55H Parallel I/F bidirectional mode
Appendix
Table 7-15. EEPROM Address Map
Data Format
b0:LOAD/EJECT function
b1:LF/FF function
b2:TEAR OFF/BIN Function
b3:Micro Adjust function
b4:(reserved)
b5:(reserved)
b6:(reserved)
b7:(reserved)
b0:Font Selection
b1:Condenced Selection
b2:Pause function
b3:Reset function
b4:(reserved)
b5:(reserved)
b6:(reserved)
b7:(reserved)
3 to 30 (by 0.1 sec.), 00H : 1.5 sec.(same as default)
3 to 30 (by 0.1 sec.), 00H : 3 sec.(same as default)
0:Auto I/F selection
1:Parallel I/F
2:Type-B I/F
10:10 sec.
30:30 sec.
00:10 sec.(same as default)
0: On(64Kbyte)
1: Off(1 byte)
0:Auto
1: On
2: Off
b0:Parallel I/F bidirectional mode 0:On
b1-b7: (reserved)
EEPROM Address Map
00H (1.5 sec.)
00H(10 sec.)
1:Off
Revision C
Q-pit data Factory Setting
00H 00H
00H 00H
00H (1.5 sec.)
00H (3 sec.) 00H (3 sec.)
0000H 0000H
00H(Auto) 00H(Auto)
00H(10 sec.)
00H(On) 00H(On)
00H(Auto) 00H(Auto)
00H 00H
00H 00H
115