Application - Schwank P40U Owner's Manual

WARN-
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read and understand this installation and opera-
tion manual thoroughly prior to assembly, installation, operation or service to this
appliance.
This heater must be installed and serviced only by a trained gas service technician.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity of
this or any other gas fired appliance.
Failure to comply could result in personal injury, death, fire and/or property damage.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity of
this or any other gas fired appliance.
This appliance may have sharp edges and corners. Wear protective clothing such
as gloves and protective eye wear when servicing this or any other appliance.
INSPECT PRODUCT UPON RECEIPT
Inspect the carton and heater for concealed damage. Note any damage on the Bill of Lading
and make any damage claim to the transport company as soon as possible.

APPLICATION

It is beyond the scope of these instructions to consider all conditions that may be encountered.
Installation must conform with local building codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54 in the U.S.A. or the Natural Gas and Propane
Installation Code, CSA B149.1 in Canada. The latest edition Electrical Code ANSI/NFPA N0 70
in the U.S.A. and PART 1 CSA C22.1 in Canada must also be observed.
Installation of a gas fired tube heater must conform to all heating installation procedures includ-
ing clearance to combustibles, connection to the gas and electrical supplies, and ventilation.
This heater is not for installation in a Class 1 or Class 2 explosive environment. If the applica-
tion is in question, consult with local authorities having jurisdiction (Fire Marshall, labor depart-
ment, insurance underwriter, or other authority).
Revisions to codes and/or standards, may require revision to equipment and installation proce-
dures. In case of discrepancy, the latest codes, standards, and installation manual will take pri-
ority over prior releases.
MODELS AVAILABLE in the Schwank P40U & InfraSave P40U-I Series:
Models P40U and P40U-I may be installed for heating of commercial/industrial indoor spaces.
Models P40U-P and P40U-IP have a powder coated water resistant burner enclosure and may
be installed for heating of commercial / industrial outdoor spaces and wet indoor environ-
ments.
Models P40U-W and P40U-IW have a stainless steel water resistant burner enclosure and
may be installed for heating of commercial / industrial outdoor spaces and harsh wet indoor
environments.
P40U-F / P40U-IF I&O Manual
IM101220
RD: MAR 2014
RL: 4B
4