23. SPARK IGNITER SET UP
Use the following diagram to check the Igniter gap. If the gap is incorrect all adjustments
should be made to the GROUND PRONG/PIN ONLY! DO NOT BEND THE IGNITER
PRONG!!!!
USE THE BLACK BARS BELOW AS A GUIDE FOR AD-
JUSTMENT.
USE THE BARS THAT COINCIDE WITH
THE FORMAT & SIZE OF THIS PUBLICATION .
IF
this manual is in
"booklet" format
8.5" x 11"
(pages folded in half)
then use these bars
OR
IF this manual is printed
8.5" x 11" "full page" format
use these bars
P40U-F / P40U-IF I&O Manual
IM101220
RD: MAR 2014
RL: 4B
3/16"
1/4"
1/4"
3/16"
34
ADJUST