Table of Contents
Advertisement
Daylight Saving
Stop Time
Daylight Saving
Offset
3.7.3. Maintenance
Default Settings
(Include the network
setting)
Default Settings
(Except the network
setting)
Backup Setting
Restore Setting
Firmware upgrade
Sets up the date and time of daylight saving stop time.
Sets up the date of daylight saving offset.
Recall the device hard factory default settings. Note that click
this button will reset all device's parameters to the factory
settings (including the IP address).
The unit is restarted and most current settings are reset to
factory default values. This action will not reset the network
setting.
To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous
settings, if settings are changed and there is unexpected
behavior.
Click the "Browse" button to locate the saved backup file and
then click the "Restore Setting" button. The settings will be
restored to the previous configuration.
The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
56
Advertisement
Table of Contents
