Initial Utility Installation - Planet ICA-3350V User Manual

5. Attach BNC connector (option)
Connect the video BNC connector to a monitor set if necessary check camera viewing angle and
focus.
6 Attach Speaker to camera (option)
If user needs not only video stream but also audio stream, then the speaker should be attached to
camera.
7. Done

2.4 Initial Utility Installation

This chapter shows how to quick set up your H.264 camera. The camera is with the default
settings. However to help you find the networked camera quickly the windows utility PLANET IP
Wizard II can search the cameras in the network that shall help you to configure some basic
setting before you started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the "IP Wizard II" hyperlink; you will see the dialog box as below.
If the welcome screen does not appear, click "Start" at the taskbar. Then, select
NOTE:
"Run" and type "D:\Utility\IPWizard II\setup.exe", assume D is your CD-ROM drive.
3. The "Welcome to the InstallShield Wizard for PLANET IP Wizard II" prompt will display on the
screen and click "Next" to continue.
14