Assembly - Ironman Fitness Gravity 4000 Owner's Manual

1
Stand up the base of the machine, by separating the
u-frames.
Pull the Front and Rear U-Frames (1,2) as far apart
from each other as possible. Then push down on the
middle of the two Folding Arms (8) until they are
fully locked down.
Attach the Left & Right Foot Caps (50,49) to the Front
& Rear U-Frame (1,2) each with two Screws (48,51)
and Washers (54).
2
Install two Nut Caps (55) onto Lock Nuts (15).
Slide one Protective Cover (37) on to each side of the
base as shown, and pull down on the Protective Covers
(37) until the bottom of the covers are slightly lower
than the Folding Arms (8).
Use the velcro straps on the bottom of the Protective
Covers (37) to secure the covers to the Folding Arms (8).
When the covers are assembled correctly, the Folding
Arms (8) should be fully covered by the Protective
Covers (37) with the logo on the outside.

ASSEMBLY

2
50
54
48
51
37
2
9
8
1
49
51
48
49
54
48
51
55
15
50
54
51
48
55
1