SABINE SWM7000 Operating Manual page 47

915 mhz systems 2.4 ghz systems

Hide thumbs Also See for SWM7000:

Table of Contents

13.4.2.6. options Menu

Copy Parameters. This window allows you to copy your

settings for all functions to any number of other channels.

Select the channel you want to copy from by first selecting

the receiver, then the channel. From the Options Menu,

choose Copy Parameters. You will see your selected chan-

nel displayed in a red field labeled "Copy Parameters From."

Select the channels you want to copy to from the Available

Channels list, then check the boxes of the parameters you

wish to copy. Once you are sure of your selections, hit Copy

Now and your settings will be pasted to the selected channels.

Note that RF channel selections cannot be copied.

Reset Parameters. This window allows you to selectively

reset any of the functions in your receiver. Choose Reset

Parameters from the Options Menu, then check the boxes of

the functions you would like to reset to their default settings.

In order to reset FBX filters, use the dedicated button on the

Command View. If you wish to load the factory default for the

entire receiver, choose Preset 00 from the Program drop-down

on the Command View and select the Load button.

BEFoRE DISConnECTInG RECEIVER FRoM CoMPuTER

Quit all SWM Software functions and close software BEFORE disconnecting the receiver connection to you

computer. Failure to do this may cause the receiver to lock up. In case of receiver lock up, restart receiver.

Remote Control operation

WARnInG:

Fig. 13L Copy Parameters window

Fig. 13m Reset Parameters window

Sabine Smart Spectrum

LIT-SWM6-7000-OG-EN-110203.indd

Wireless

Table of Contents

Swm6000