Advertisement
Quick Links
OPERATING GUIDE
Gooseneck Microphones with built-in IR
Gate and Phantom Mic Ride Pro features,
including Sabine signal processing with 115
dB dynamic range and reduced phantom
power requirements.
• Models and Descriptions
• Installation & Operation
XLR models
• Mic Capsule & IR Sensor Details
• Installation & Operation
Base models
• Product Specifications
• Frequently Asked Questions
• Warranty & Cautions
© 2008 Sabine, Inc.
T
able of
C
onTenTs
2
4
7
8
12
14
Advertisement
Related Manuals for SABINE PHANTOM 45 Series
Summary of Contents for SABINE PHANTOM 45 Series
- Page 1 Gooseneck Microphones with built-in IR Gate and Phantom Mic Ride Pro features, including Sabine signal processing with 115 dB dynamic range and reduced phantom power requirements. able of onTenTs • Models and Descriptions • Installation & Operation XLR models • Mic Capsule & IR Sensor Details • Installation & Operation Base models • Product Specifications • Frequently Asked Questions • Warranty & Cautions © 2008 Sabine, Inc.
- Page 2 Congratulations on getting your new Phantom Goose- Your SGM Series mic includes a built-in IR Gate that neck Microphone. that turns the mic on and off based on the presence of a person in front of the mic – a great way to auto- This operating guide covers the use of all SGM Series mate your mic cues. Your SGM 45 Series mic also Phantom Gooseneck Mics. Find which Phantom includes the processing of the Phantom Mic Rider Mic you have and follow the instructions for each Pro. Automatic Gain Control and Plosive/Proximity one. Note the line drawing associated with each type Effect Control give you the power to make the mic of mic - this will help you find yours in the rest of this sound right no matter who steps up to it. operating guide. 40 Series: 45 Series: with built-in Infrared Gate only with built-in Phantom Mic Rider Pro SGM18-C-PMR40 SGM18-C-PMR45...
- Page 3 • Existing shock-mount plate or flush-mount female XLR connector. Controls: Time and Range, or Disable the Gate • Sabine shock-mount plate models SGM-SMP45-T TIME: Set the time it takes to turn off the mic after or SGM-SMP45-S. For installation instructions on someone walks away from the mic. these models, please see the guide that comes with Settings: 5, 10, or 15 seconds. Default is 10 seconds. this accessory. Control: A momentary push of the IR Gate control Verify Operation button reveals the current setting. Press again to...
- Page 4 Control and Indicator Mic Capsule and IR Sensor Details Summary Charts OPERATION Capsule, with windscreen Green Amber Program IR Program IR Mic is on Range Time Mic is off IR Sensor PROGRAMMING THE INFRARED GATE IR Gate - Time Button Push Once Push Once Push Once...
- Page 5 Use Phantom tool back to the beginning. ON/OFF SWITCH Switch Function Control Indicator: The two-color LED will flash red once to Three position slider indicate a 3 foot (one meter) IR Gate distance, two ON TOGGLE PRESS times for a 6 foot (two meter) IR Gate distance, 3 times to indicate a 9 foot (three meter) distance, and See the chart on page 10 for SABINE 4 times to indicate the IR Gate is disabled. In this a summary of all control and indicator functions. case the mic is always on and the slider switch and button are ignored.
- Page 6 1 red flash 2 red flashes 3 red flashes 4 red flashes holding the top on/off button. In IR Disabled Setting 3 feet 6 feet 9 feet IR TIME this setting the top button acts SABINE like a "push-to-mute" button. AGC, Plosive, & Proximity Effect Control IR RANGE This control uses a poten- tiometer to simultaneously 45-SW 45-NS adjust the parameters for...
- Page 7 SGM Gooseneck Microphones Included in the box: Product Specification • SGM Gooseneck Mic, w/windscreen • Phantom Tool for adjusting settings MICROPHONES • Operating Guide • Capsule type: electret condenser • Polar patterns: Cardioid or Super-cardioid • Sensitivity (at 1 KHz): -58 dB (1.25 mV) • Maximum SPL for 1% THD: 125 dB PHANTOM MIC RIDER PRO Processing functions: • SGM Gooseneck mic, w/ • Automatic Gain Control: adjustable from 1:1 to 4:1 windscreen and base • Proximity Effect Control: three settings • Phantom Tool for adjusting • Plosive Control: three settings settings • Operating Guide • Frequency response: 45 Series: 80 Hz to 18 kHz 40 Series: 50 Hz to 18 kHz • Dynamic range: 115 dB typ (unweighted) • Distortion: <0.05% @ 1kHz • Propagation Delay: 0 ms • Audio connector: 3-pin XLR SGM Frequently Asked Questions • Input resistance: 20k Ohm • IR Sensor detection range: 3, 6, 9 feet Q: Why is my gain reduced? • IR Time to turn off: 5, 10, 15 sec A: If the AGC/Plosive Control is set to a high level...
- Page 8 B. Anything has fallen or been spilled into the unit. or an amount equal to the purchase price of the product that caused the damage or that is the C. The unit does not operate correctly. subject of or is directly related to the cause of action. Such purchase price will be that in effect D. The unit has been dropped or the enclosure damaged. for the specific product when the cause of action arose. This limitation of liability will not apply 15. The user should not attempt to service this equipment. All service work should be done by to claims for personal injury or damage to real property or tangible personal property allegedly a qualified service technician. caused by Sabine’s negligence. Sabine does not assume liability for personal injury or property FCC STATEMENT damage arising out of or caused by a non-Sabine alteration or attachment, nor does Sabine assume any responsibility for damage to interconnected non-Sabine equipment that may result Warning: Changes or modifications to this unit not expressly approved by the party responsible from the normal functioning and maintenance of the Sabine equipment. for compliance could void the user's authority to operate the equipment. UNDER NO CIRCUMSTANCES WILL SABINE BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, ANY INCIDENTAL DAMAGES OR ANY CONSEQUENTIAL DAMAGES ARISING OUT This device complies with Part 15, Class B, of the FCC Rules. Operation is subject to the following OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF SABINE HAS BEEN ADVISED conditions: (1) This device may not cause harmful interference; and (2) This device must accept OF THE POSSIBILITY OF SUCH DAMAGES. any interference received, including interference that may cause undesired operation.
- Page 9 REGISTER YOUR SABINE PRODUCT ONLINE AT WWW.SABINE.COM Manufactured by: Sabine, Inc. 13301 NW US Highway 441 Alachua, Florida 32615-8544 USA Tel: +USA (386) 418-2000 Fax: +USA (386) 418-2001 www.Sabine.com © 2008 Sabine, Inc. LITSGM-OP-080504.indd - rr...