Appendix A Manual Programming ................. 10 Appendix B Frequencies and Groups ................11 Appendix C Rack-Mounting Receivers ................11 Appendix D Tips for Improving System Performance ............ 12 Appendix D Troubleshooting ..................12 Appendix E Specifications ....................13 Sabine SWM4000 Smart Spectrum Wireless ® LIT-SWM4000-OG-EN-100205.indd...
• See Appendix A for manually selecting the frequencies of your system. • Be sure that only one transmitter’s IR port is exposed when setting up a system. Sabine SWM4000 Smart Spectrum Wireless ®...
1/4” jack output for module D (unbalanced) Mixed output for all modules (unbalanced) XLR output jack for module C (balanced) PSU power jack 1/4” jack output for module C (unbalanced) XLR output jack for module B (balanced) Antenna A Sabine SWM4000 Smart Spectrum Wireless ®...
Lock/unlock receiver settings Transmitter Battery status Automatic frequency selection Display frequency Incompatable frequency Squelch Antenna jack B SW40-RH XLR output jack 1/4 jack output jack AC adapter jack Antenna jack A Adapter cord tie-off Sabine SWM4000 Smart Spectrum Wireless ® LIT-SWM4000-OG-EN-100205.indd...
This is useful if you are working with talent that might accidentally turn off the mic. Battery Life Indicator: The battery symbol shows the battery level. Typical battery life is 8 hours. Sabine SWM4000 Smart Spectrum Wireless ®...
Remember to press power and set button to confirm when the setting is completed. Press the power and set buttons simultaneously to lock or unlock the transmitter settings. When locked, the current settings cannot be changed manually. Indicates charge remaining in transmitter batteries. Sabine SWM4000 Smart Spectrum Wireless ® LIT-SWM4000-OG-EN-100205.indd...
Also, dipole antennas should be orientated to the 11:00 and 2:00 positions for the best reception. If the antennas are blocked or shadowed, you should replace the SWAANT antennas with Sabine’s SWASS-EXT-3 external antennas. Make sure you specify the frequency band of your system when you order.
• See Appendix A (pg.10) for manually selecting the frequencies of your system. • Be sure that only one transmitter’s IR port is exposed when setting up a system. Sabine SWM4000 Smart Spectrum Wireless ®...
S.Q. Group selection Audio signal SW40-RH LCD display Antenna status Group selection Manual channel selection INCOMPATIBLE Lock/unlock receiver settings Transmitter Battery status Automatic frequency selection Display frequency Incompatable frequency Available only on the SW40-RH Sabine SWM4000 Smart Spectrum Wireless ®...
SWM4000 systems are available in several frequency ranges. Contact your local retailer to determine the bands that are suitable in your area. Sabine is making new frequency bands available as the regulations evolve. The most current information can be found at www.Sabine.com.
2”AA’ size alkaline or rechargeable batteries -105 dBm for 12 dB SINAD, typical Battery Life Image Rejection >8 hours (alkaline) >70 dB, typical Power Requirements 22V dc at 400mA, supplied by external power supply Sabine SWM4000 Smart Spectrum Wireless ® LIT-SWM4000-OG-EN-100205.indd...
Page 18
03/01/2010 Sabine, Inc. 13301 NW US Highway 441 Alachua, Florida 32615-8544 USA Phone: (386) 418-2000 W I R E L E S S SYS T E M S Fax: (386) 418-2001 www.Sabine.com...
Need help?
Do you have a question about the SWM4000 Series and is the answer not in the manual?
Questions and answers