SABINE SWM7000 Operating Manual page 41

• RF Scan and Report, which measures strength for each of the transmis-
sion channels (70 for the SWM7000, 34 for the SWM6000), and displays
a hierarchical ordering of the clearest, strongest channels to use during
system setup and operation. You can print a copy of the scan results.
• Additional memory options. In addition to saving presets in receiver
memory, channel configuration settings can be saved to and recalled from
disc or hard drive. All parameter settings made with the remote control,
including adjustments that are not accessible from front panel controls
(e.g., compressor knee and release), are saved with presets. All software
settings stored for each of the 10 presets, including settings not accessible
from the front panel, will be loaded whether presets are recalled by remote
control or from the front panel. Note that all settings made in Off-line/Edit
mode can be saved and applied in online operation.
• Ability to print a report of all parameter settings, creating hard copy
documentation.
• A receiver channel output mute button.
• The ability to custom name each RF channel and receiver. This name
will be displayed in the software only.
• Display of important transmitter status information. In addition to
duplicating the battery charge status, battery warning message, and
transmitter on/off/mute status from the front panel display, the Remote
Software displays the number of hours the battery has been in use, the
frequency midpoint (in GHz) of the transmission channel chosen, the
transmitter pad and low cut filter settings, and a warning indication in the
case of low RF signal strength. For handheld transmitters, the software
display also shows the type of mic capsule in use.
• Improved and expanded operational displays. In addition to organizing
all front panel displays on a single computer screen, the Remote Software
also displays the exact frequency, width, and depth of FBX filters. The
frequency response curve resulting from combined filter settings (includ-
ing FBX, parametric, and high and low cut) is graphically displayed in the
software. Frequency response changes imposed by choosing various
microphone models are also shown.
• Customizable front panel lock settings. Software control allows you
to program selective access to front panel controls to be made available
once the Remote Control is disconnected. Customizable front panel lock
settings are saved and recalled as part of each receiver's settings. All
software-only accessible settings are saved with presets. Careful program-
ming enables some powerful operational features — for example, locking
Program Save but enabling other front panel controls (including Program
Load) will let front panel users update settings temporarily, yet reload the
original settings at the push of a button. Such a temporary adjustment
would not permanently alter a setup designed to work in most situations,
but would allow tweaking to address unusual situations.
BEFoRE DISConnECTInG RECEIVER FRoM CoMPuTER
Quit all SWM Software functions and close software BEFORE disconnecting the receiver connection to you computer.
Failure to do this may cause the receiver to lock up. In case of receiver lock up, restart receiver.
Remote Control operation
WARnInG:
41
Sabine Smart Spectrum Wireless
®
LIT-SWM6-7000-OG-EN-110203.indd