Future Microphone Modeling Choices; Mic Model Upgrade Instructions - SABINE SWM7000 Operating Manual

There are no modeling settings for lavalier or headset microphones — mic
placement makes these an unrealistic choice for modeling. NOTE: other lavalier
microphones can be used with the Sabine Beltpack Transmitter.

6.4. Future Microphone Modeling Choices

When Sabine adds to the library of "virtual microphones" that are modeled by
the receiver DSP, these will be made available as a firmware upgrade from the
Sabine web site, www.Sabine.com.

6.4.1. Mic Model upgrade Instructions

New Mic SuperModeling
tm
downloaded easily using the remote control software
on your PC. NOTE: The Mic SuperModeling Update
Wizard can be accessed only from the initial soft-
ware startup menu (prior to connecting to a receiver
or entering Demo/Edit Mode). If you have already con-
nected and attempt to access the Upgrade Wizard, the
message box at right will appear (Fig. 6b):
To download new mic models:
1. With your PC connected to the Internet, pull down the Sabine
Online menu in the software menu bar and select "Add New
Mic Models."
2. Click the "Download Mic Models from Sabine" and follow the
dialog box instructions.
3. The last dialog box will allow you to either connect to a re-
ceiver and update the mic models on that receiver, or cancel
and complete the upgrade process at a later date. Note that
this dialog box will show the actual file path of the new mic
model file.
Upgrading from a disk or previously downloaded files:
Mic SuperModeling™ files already downloaded can be flashed
into your receiver using the second option "Load Mic Models from
disk." Clicking this button opens a dialog box (default directory is
your "Sabine" directory).
NOTE: File name will always be "micmodels.smm" and will in-
clude all mic models available up to the date the file was downloaded.
"virtual microphones" can be
A very short crossfade of the audio sig-
nal occurs when switching between mic
models. This ensures no digital artifacts
will occur when you change the sound
of the mic.
Fig. 6b
Fig 6c
Mic SuperModeling
beltpack transmitters.
Sabine's Mic SuperModeling™ function
requires a baseline characteristic for the
capsule in use. Therefore, after changing
capsules, you will need to "tell" the trans-
mitter which capsule is now attached.
NOTE: this is only necessary when the
capsule is changed.
See Appendix G for instructions on how
to reset your transmitter after changing
capsules
27
Mic SuperModeling™
noTE
noTE
is not available using
tm
CHANGING CAPSULES
Sabine Smart Spectrum Wireless
®
LIT-SWM6-7000-OG-EN-110203.indd