SABINE SWM7000 Operating Manual page 37

11.3. Antenna Distribution Amplifier Connection
1
Connect receiver Antenna 1 input to any RF
Output 1 connector on the SWA6SS.
.
Receiver Antenna Distribution
Amplifier (SWA6SS)
2
Connect any receiver Antenna 2 to any RF
Output 2 connector on the SWA6SS.
Receiver Antenna Distribution
Amplifier (SWA6SS)
3
Continue with remaining receivers
Fig. 12a: SWA6SS Antenna Distribution Amp Back Panel
SWA6SS
Antenna
Distribution
Amplifiers
Antenna 2
SWM
Series
Receivers
IMPoRTAnT
!
Active Electronics Antenna
Sabine wireless receivers provide
antennas with active electronics. The
inputs to the receiver & antenna dis-
tributor amplifier have phantom ower
available for this purpose.
DO NOT SHORT TO GROUND
IMPoRTAnT
!
Antenna Cabling Impedence
must be 50 Ohm.
37
Multiple Systems operation
To Extension Anten-
nas
RF Output 2 RF Output 1
Antenna 1
!
!
Sabine Smart Spectrum Wireless
®
LIT-SWM6-7000-OG-EN-110203.indd