Troubleshooting - Jura ENA Micro 1 Instructions For Use Manual

7 Troubleshooting

7 Troubleshooting
Problem
Coffee only comes out in
drips when it is being
prepared.
The Water Tank symbol M
lights up even though the
tank is full.
The ; and _ symbols flash
alternately.
Grinder is making a very loud
noise.
When the ENA is switched on,
the Cleaning symbol L
flashes for 5 seconds. The
machine then switches off.
E If you were unable to solve the problem,
contact customer support in your country
(see Chapter 11 'JURA contact details / Legal
information').
40
Cause/Result
Coffee or ground coffee has
been ground too finely and
is blocking the system.
The water tank float is
trapped.
The system must be filled
with water.
There are foreign objects in
the grinder.
If the machine was exposed
to the cold for a long period
of time, heating is disabled
for safety reasons.
Action
T Set the grinder to a coarser setting
or use coarser ground coffee (see
Chapter 1 'Preparing and using for the
first time – Adjusting the grinder').
T Descale the water tank (see Chapter 5
'Maintenance – Descaling the water
tank').
T Fill the water tank (see Chapter 1
'Preparing and using for the first
time – Filling the water tank').
T Touch the ; or _ symbol.
The system fills up with water.
T Contact customer support in your
country (see Chapter 11 'JURA contact
details / Legal information').
T Warm the machine at room
temperature.