Changing The Filter - Jura ENA Micro 1 Instructions For Use Manual

& T Touch the Descaling symbol.
The Y, <, > and & symbols flash and water
flows directly into the drip tray.
The Y, < and > symbols flash and water
flows out of the coffee spout.
The operation is interrupted, the Coffee
Grounds Container symbol ? lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
Your ENA is once more ready for use.
E If the descaling operation stops unexpect-
edly, rinse the water tank thoroughly.
Descaling the machine without a prompt: You
can initiate the 'Descaling the machine' operation
manually at any time as long as the machine is
ready for use. Touch the ; and _ symbols at
the same time for approximately 2 seconds.
The ;, _, L and & symbols light up brightly.
Continue with the first prompt (indicated by T) as
described in this section.

Changing the filter

E After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition: Your ENA is ready for use. The Filter
symbol ! lights up.
! T Touch the Filter symbol for approximately
2 seconds.
The Water Tank symbol M lights up.
T Remove the water tank.
T Open the filter holder and remove the old
filter cartridge.
T Insert a new filter cartridge into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
The Coffee Grounds Container symbol ?
lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Filter symbol ! lights up.
! T Touch the Filter symbol to start rinsing of
the filter.
The Y, <, > and ! symbols flash. The filter
is rinsed. Water flows directly into the drip
tray.
Rinsing of the filter stops automatically. The
Coffee Grounds Container symbol ? lights
up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The machine heats up. Your ENA is once
more ready for use.
Changing the filter without a prompt: If the filter
is activated, you can initiate the 'Changing the
filter' operation manually at any time as long as
the machine is ready for use. Touch the ; and _
symbols at the same time for approximately
2 seconds. The ;, _, L and ! symbols light up
brightly. Continue with the first prompt
(indicated by T) as described in this section.
de
5 Maintenance
en
fr
it
nl
es
pt
ru
37