Broil King Broil Chef BC300EN Owner's Manual page 16

Step 22 (Battery insertion)
a) Release the cover of igniter by turning the cover
counter-clockwise.
b) Insert the battery (KK) into the igniter.
Note: positive pole "+" face outside when insertion.
c) Screw the cover of igniter back.
Part Description
AAA Motor support
BBB Shaft
CCC Balance block
a) Insert the shaft (BBB) into the hole on the two forks
(FFF), tighten the bolt on forks by hand until it is secured.
b) Insert the balance block (CCC) and roller (EEE) into
shaft in sequence as shown.
a) Loosen the pre-attached nuts and bolts on the motor support (AAA).
b) Align the hole one the motor support (AAA) w/ the hole on the left side wall of firebox.
c) Insert one bolt, one flat washer and one nut into each pre-drilled hole and tighten using the screw driver provided.
d) Insert the motor (DDD) into the motor support (AAA) and push down until it is in place.
e) Insert the shaft assembly above into the hole on motor (DDD) and move the balance and roller (EEE) to correct position
as shown. Make certain the bolt on roller is tighten before operation.
BC300EN Broilchef Natural Gas Grill
Owner's Manual
Step 23 (Light installation. Option)
a) Insert the light (GG) into the hole on right side table.
ROTISSERIE KIT ASSEMBLY (Option)
QTY
1
1
1
Part Description
DDD
EEE
FFF
16
Motor
Roller
Fork
QTY
1
1
2