Broil King Broil Chef BC300EN Owner's Manual page 11

Step 8 (Grease cup holder assembly)
a) Align the holes on grease cup holder (L) with the holes on
the right side panel (H).
b) Insert one bolt (BB) and one flat washer (DD) into each
pre-drilled holes. Tighten bolts by hand.
c) Go back and tighten all bolts using screwdriver provided.
d) Place grease cup (N) on grease cup support.
BC300EN Broilchef Natural Gas Grill
Owner's Manual
Step 7 (Door assembly)
a) Insert the bottom pin of door (K) into
b) Push down the top pin on door
c)
Step 9 (Assemble the grill body to the cart)
a) Put the grill body (O) on the top of cart assembly.
b) Align the two holes on the top of cart left side panel
with the two holes on the left side of body
assembly.
c) Insert one bolt (AA), one spring washer (EE) and
one flat washer (DD) into each pre-drilled hole.
Tighten bolts by hand until secure.
d) Repeat the procedure for the right side of body
assembly with right side panel.
e) Go back and tighten all bolts using the screwdriver
provided.
Attention:
Unpack the regulator/hose
assembly (located underneath the firebox)
prior to assembling the grill body to the cart,
and push the regulator/hose into the hole on
cart left side panel when go ahead to this
step.
11
the pre-drilled hole on the cart bottom
panel.
insert it into the pre-drilled hole on
the right end of front beam (J).
Close the door.
and