Broil King Broil Chef BC300EN Owner's Manual page 10

Step 4 (Back panel assembly)
a) Align the holes on right side of back panel (I) with the
holes on the right panel (H) and bottom panel (A).
b) Insert one bolt (BB) and one flat washer (DD) into each
pre-drilled holes. Tighten bolts by hand.
c) Repeat the procedure on left side of back panel with the
left panel and bottom panel.
d) Go back and tighten all bolts using screwdriver provided.
Step 6 (Door handle assembly)
a) Align the holes on one of handle seat (FF) with the
holes on the door (K).
b) Insert one bolt (BB), one spring washer (EE) and one
flat washer (DD) into pre-drilled holes. Tighten bolts
by hand.
c) Insert handle (EE) into handle seat.
d) Repeat the procedure a-b on another handle seat.
e) Go back and tighten all bolts using screwdriver
provided.
BC300EN Broilchef Natural Gas Grill
Owner's Manual
Step 5 (Front beam assembly)
a) Align the holes on right side of front beam (J) with the holes on
the right panel (H).
b) Insert one bolt (BB), one spring washer (EE) and one flat washer
(DD) into each pre-drilled holes. Tighten bolts by hand.
c) Repeat the procedure on left side of front beam with the left
panel.
d) Go back and tighten all bolts using screwdriver provided.
10