Broil King Broil Chef BC300EN Owner's Manual page 13

Step 14 (Side burner ignition cable connection)
a) Insert the ignition cable of the side burner into the electrode.
BC300EN Broilchef Natural Gas Grill
Owner's Manual
Step 13 (Hose hanger assembly)
a) Align the holes on hose hanger with the holes on
left table front support (Q) underneath left table.
b) Insert one bolt (BB) and one flat washer (DD) into
the pre-drilled hole.
c) Align the holes on hose support with the hole on left
table front support (Q) underneath left table.
d) Insert one bolt (BB), one spring washer (EE) and
one flat washer (DD) into the pre-drilled hole.
e) Go back and tighten all bolts using the screwdriver
and wrench provided.
Insert the ignition cable of side
burner into electrode.
Step 15 (Wind shield assembly)
Loosen the pre-installed bolts on on side table front support (Q)
a)
and back support (R) and allow 1/4 bolt's length to extend from
support.
b) Align the holes on wind shield (HH) with the hole on side table
front support and back support then tighten the bolts by
hand.
c) Go back and tighten all bolts using screwdriver provided.
13