Configuring Subnet Vlan; Figure 4 Subnet Vlan Configuration Example - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Ethernet Switching Volume)
Step Command
1
ZXR10(config)#
-no><ipaddr><mask> vlan {<vlanid><name>}
2
ZXR10(config)#
Example
12 Confidential and Proprietary Information of ZTE CORPORATION

Configuring Subnet VLAN

vlan subnet-map session-no<session
show vlan subnet-map
As shown in Figure
ure VLAN20 and VLAN30. Port gei_1/1 belongs to VLAN20, port
gei_1/2 belongs to VLAN30, port gei_1/10 belongs to both VLAN20
and VLAN30. Configure different PVIDs for gei_1/1, gei_1/2 and
gei_1/10. PCs in 20.20.20.0/24 have access to server 1, and the
PC whose IP address is 30.30.30.1 has access to server 2.
F 4 S VLAN C
IGURE UBNET
Configuration of switch:
/*Create a VLAN and assign ports to it*/
ZXR10(config)#interface gei_1/1
ZXR10(config-gei_1/1)#switchport mode hybrid
ZXR10(config-gei_1/1)#switchport hybrid native vlan 20
ZXR10(config-gei_1/1)#switchport hybrid vlan 20 untag
Function
This creates a subnet VLAN.
This displays configuration of
subnet VLAN.
4, configure VLAN data on the switch. Config-
E
ONFIGURATION XAMPLE