Zte ZXR10 5900 Series User Manual page 127

Chapter 14 L2PT Configuration
Zxr10(config-gei_1/1)#l2protocol-tunneled stp enable
Zxr10(config-gei_1/1)#switchport qinq customer
Zxr10(config-gei_1/1)#switchport access vlan 10
Zxr10(config-gei_1/1)#exit
Zxr10(config)#interface gei_1/2
Zxr10(config-gei_1/2)#switchport mode trunk
Zxr10(config-gei_1/2)#switchport trunk vlan 10
Zxr10(config-gei_1/2)#exit
Zxr10(config)#spanning-tree enable
2. On tunnel exit edge switch B, the port that connects the
provider network is configured L2PT tunnel port, the port that
connects client network device is configured access port.
Zxr10#conf t
Zxr10(config)#vlan 10
Zxr10(config-vlan10)#exit
Zxr10(config)#inter gei_1/11
Zxr10(config-gei_1/11)#l2protocol-tunneled stp enable
Zxr10(config-gei_1/11)#exit
Zxr10(config)#interface gei_1/12
Zxr10(config-gei_1/12)#switchport access vlan 10
Confidential and Proprietary Information of ZTE CORPORATION 115