Importing/Exporting Configuration Files; Upgrading The System - HIKVISION Network Audio/Video Encoder User Manual

User Manual of DS-6700 Series Audio/Video Encoder

By selecting the Restore button, the device restores the default settings for the parameters except the IP
address, subnet mask, gateway and port.

By selecting the Default button, the device restores the default settings for all parameters.
On the pop-up message box, click OK to restore and reboot the device to validate the settings.

12.3.3 Importing/Exporting Configuration Files

The configuration files of the device can be exported to local device for backup; and the configuration files of one
device can be imported to multiple device devices if they are to be configured with the same parameters.

On the Maintenance> Import Config File interface, click Browse to select the file from the selected
backup device and then click the Import button to import a configuration file.
Note: After having finished the import of configuration files, the device will reboot automatically.

On the Maintenance> Export Config File interface, click the Export button to export configuration files to
the selected local backup device.

12.3.4 Upgrading the System

On the Maintenance> Remote Upgrade interface, click Browse to select the local update file and then click
Upgrade to start remote upgrade.
Figure 12.6 Pop-up Message Box
Figure 12.7 Import/Export Config Files
Figure 12.8 Remote Upgrade
81