Page 1
VGA Matrix Switcher Series Thank you for purchasing the SB-4148 VGA-Audio Matrix Switcher. You will fi nd this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use this switcher.
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fi re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
The information in this manual has been carefully checked and is believed to be accurate. We assume no responsibility for any The SB-4148 is useful for Matrix signals from VGA source devices infringements of patents or other rights of third parties which may (such as: Personal computer, Set Top Box, and Satellite Receiv- result from its use.
FEATURES & SPECIFICATIONS FEATURES • Supports 4x inputs VGA+Audio to 8x VGA-Audio outputs Matrix Switcher • Input signals support via VGA (RGBHV), Stereo Audio(AR/AL) • Output Signals support VGA and Stereo Audio to VGA Monitor display • Higher Video Bandwidth 325MB each path R,G,B signals. •...
FRONT PANEL FRONT PANEL 1. POWER ON SWITCH The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power 2. SOURCE DEVICE STATUS LED DISPLAY Channels 1 to 4 shown from LED display illuminates red to indicate that a video source is present on that input. 3.
BACK PANEL BACK PANEL 1. DC POWER INLET: Power Jack: The switcher is fi tted with a DC power plug input connector. DC Jack - Inner OD Ø 2.1 mm (+) Please ensure that the plug used is of an approved type and is Outside OD Ø...
REMOTE CONTROL Before making any connections to the SB-4148. Observe the following: Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%). Ensure that the power switch is OFF. Ensure that all system grounds (earth) are connected to a common point.
- Rcvd FRONT PANEL LOCK Note: Hard resetting the unit will unlock the Front Panel controls. MORE STUFF FOR SB-4148 Note: Turning the unit System Power Off over RS-232 will SBSYSMLK - When front panel is locked, changes can only be...
OUTPUT 1 - 8 PORT VGA CONNECT TO DISPLAY MONITOR SIGNALS: VIDEO - VGA(RGBHV), connector with HD-15p (D-Sub) AUDIO - Stereo Audio (AR/AL), Connector via OD3.5mm Ear phone Jack SB-4148 SUPPORT VGA FOUR INPUTS MATRIX TO EIGHT SWITCH OUTPUTS SUPPORT CONTROL IR & RS-232 INTERFACE CONTROL FROM A PC...
LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
Page 11
M ULT I MEDI A AU DIO A N D VI SU A L 1399 Wildfi re Lane | Frisco, TX 75034 1-877-SHINY-USA 1-877-744-6987 1-972-377-2508 sales@shinybowusa.com www.shinybowusa.com...
Need help?
Do you have a question about the SB-4148 and is the answer not in the manual?
Questions and answers